Parts

The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install

Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our patent pending Drop-Stop® technology. These beautifully machined 110 BCD asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX / road / gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. - Fits 110 BCD Asymmetric 4-bolt Shimano cranks - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Fits 110 BCD asymmetric 4-bolt cranks - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50t are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36t chainring is NOT compatible with these cranks. - NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks - Size 42t and larger will work with the Dura Ace 9100 power meter - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline 47.5mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061-T6 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. This has a stack height of 3mm and is available in a variety of colors to match other Wolf Tooth anodized color options. These IS headsets are made exclusively for Specialized frames with molded-in internal bearing cups. Like all Wolf Tooth Premium Headsets with Enduro stainless steel bearings, the Premium IS Headset for Specialized has a lifetime warranty. Compatibility - Any Specialized bike that uses an IS (Integrated Standard) headset with 42mm upper bearing diameter. - Uppers and lowers sold separately. - Enduro stainless steel sealed bearings included on both the upper and lower. - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately). (Never use a star nut on a carbon steerer tube). - Some bikes, like the Stumpjumper EVO, have an adjustable headset that resembles a ZS headset where an upper cup is pressed into the frame. Our bearing will fit into that cup and our top cap will fit neatly on top. Measuring to determine compatibility with your Specialized frame 1. Disassemble the headset, remove upper bearing from the frame 2. Use the depth blade on a caliper to measure from the top of the headtube to the corner where the 45 degree taper starts. Known Compatible Specialized Bike Models Aluminum Mountain Bikes (except pre-2017 Chisel HT aluminum) Camber Carbon | 2014 Chisel Alloy HT (Smartweld HT) | 2017-2021 Enduro 29 Carbon | 2014 Enduro Carbon | 2017, 2020 Epic Carbon | 2014 Epic FSR | 2021 Epic FSR Carbon | 2018 Epic HT | 2017, 2020 Fatboy Carbon | 2015 Fuse Carbon | 2017 Stumpjumper | 2021 Stumpjumper Carbon | 2019 Stumpjumper EVO | 2021 Stumpjumper FSR Carbon | 2016 Turbo Levo Upper assembly features: - Ultralight Stem Cap with 5mm Integrated Spacer plus an aluminum bolt and a star nut. - One 3mm stack height top cover option. - O-ring seal prevents water intrusion around steerer tube. - Custom-molded upper lip seal provides additional protection for upper bearing.

Slightly thicker than the Razer Grips, slightly thinner than the Fat Paw Grips, these 6.5mm thick grips are great for longer rides, as they reduce hand fatigue and finger numbness. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - 6.5mm thick

Wolf Tooth Supple handlebar tape is extra thick, extra wide, extra soft, and extra tacky. Designed for the abuse of unforgiving trails. The 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - Washable surface is resistant to wear and packing out - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch - Length: 152cm

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.

ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs

The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano's current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It's an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details

9-Speed Chains - Your All-Rounder Our 9-speed chains are compatible with all common road bike, touring bike and mountain bike gear systems. The innovative high-performance plate geometry gives all types of this series the very best gear-changing properties. And for highest resistance to wear and maximum strength, we have implemented an innovative process for radial riveting. Black Coating - Brass Black, strong, extremely durable. This is ensured by the industry-proved Ultra-Black Coating. The brass-coated rollers and pins provide excellent protection against corrosion and an extraordinary look. Always included with all 9-speed chains: the unique Connex Link. - Dimensions: 1/2" x 11/128" - Pin length: 6.60mm - Roller width: 2.20mm - Pin ejection pressure: >2000 N - Pin hardening: XHB - Links: 114 - Weight: 279g - For all 9-speed systems - Suitable for ATB/trekking, city/touring, mountain bike and road bike

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 114g

Chainring spacer for adjusting the chainline on inner and middle chainrings. - Bag of 20

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

- High quality entry-level 27.5" Boost MTB disc brake wheelset - 15 x 110mm thru axle - Tubeless-ready Alex MD19 rim is strong and lightweight (470g) - Shimano MT400 hubs feature adjustable cup-and-cone bearings, aluminum front axle and steel rear axle for a perfect blend of toughness, lightness, durability and reliability - 32 black stainless steel spokes and brass nipples for long term reliability

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Formula DC22 (Black), Laser etched logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binders included - Tubeless Compatible (Valve and Tape not included) Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm

Tight enough tread spacing for high speed, drag-free onslaughts, yet blocky and tall enough to really dig in when it comes time to slam on the brakes. A rounded profile and staggered, supportive side knobs keep clamoring for traction even as the trail loses its camber. Most often used as a rear tire, the Trail Boss also keeps the front in check on hardpack trails. Want to go out and own it? Be the Trail Boss. Usage: XC / Trail / All Mountain Conditions: Dry to Damp / Hardpack to Loam - 26 x 2.25 TCS Light/Fast Rolling: 700g, Dual DNA compound - 26 x 2.25 TCS Tough/Fast Rolling: 900g, Dual DNA compound - 26 x 2.25 Comp Tube-Type: 900g, DNA compound

Born out of a need for unwavering traction in every corner of the world, the Vigilante is WTB's premier aggressive trail and enduro tire. The square-lugged, open-tread pattern offers stability through wet or dry, while the prominent outer knobs grip at lean angles like nobody’s business. Ample spacing ensures it flings mud, while also allowing the knobs to bite into loose, chunky terrain. - Usage: All Mountain / Enduro - Conditions: Wet to Dry / Loose, Rocky, Mud - TCS Light: 786g - Comp: 893g

The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Steel rails

Air-Liner GRAVEL is an insert for tubeless-ready gravel tires. Re-usable and very easy to install—as easy as mounting an inner tube on your tire—Air-Liner GRAVEL is compatible with tubeless-ready tires only and with 3-way valves (5-way valves are included for ultimate airflow). The insert can be used with sealant—preferably sealants without ammonia. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Compatible with any wheel size up to 700c with 3-way tubeless valve, and tire widths from 31mm to 40mm. - The Vittoria Air-Liner is a tire insert, designed for use in tubeless tires. - Sold individually (single tire).

Martello hammers home the performance you expect, on the most demanding Enduro and DH courses. Looking for the one tire to tackle a wide range of courses? The Martello features a World Championship proven TNT bead, add the proprietary 4C Graphene compound, topped off with a moto-inspired tread design and progressive width siping. This last part is key, and provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, Martello delivers.

The XCO European Champion tire The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique, low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob find traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal TNT is no exception. Using the proprietary Graphene enhanced 4C compound, the Mezcal attains the holy grail of XC tires; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance

The Terreno Dry bridges the gap between file treads, and traditional all-conditions treads. The key to this is the unique angled "fish scale" design, that allows the center tread to roll extremely fast, yet offer traction when loaded in cornering and braking. Add the transitional height mid and side tread, and the Terreno Dry transitions as smoothly as it rolls. The exclusive 3C Graphene compound structure places 3 unique compounds where you need them most, adding to the performance. From gravel grinding to medium conditions cross racing, the Terreno Dry offers consistent performance. - Center scales are ramped, providing a fast rolling leading edge, yet sharp effective braking and cornering edges - Exclusive 3C compound construction featuring Graphene compound technology - File-tread Gravel and Cyclocross race tire, designed for a range of conditions

Whether in Gravel or Cyclocross, one thing is for certain-course conditions are constantly changing. When you roll up to the start line, be confident knowing that you have the performance advantage of the Terreno Mix all conditions tread, no matter the terrain. At the heart of the design is a fast rolling center ridge, which is designed to minimize rolling resistance, while still providing confident braking traction. Cornering and off camber work is confidently handled by alternating open shoulder lugs. These lugs are shaped to allow a supple feel for pavement and hardpack surfaces, while still offering a solid effective edge for grass and loam terrain. The exclusive 3C Graphene compound structure places 3 unique compounds where you need them most, adding to the performance. - Exclusive 3C compound construction featuring Graphene compound technology - Fast rolling center-ridge design - Open shoulder lugs for secure off-camber traction - Traditional tread profile, for smooth transitions, across varied terrain

- 10 speed cassette - Fits Shimano/SRAM freehub - 11-36T

- 11 speed wide range cassette - Alloy spiders, spacers and lock ring - Fits Shimano/SRAM freehub

- 9 speed cassette - Fits Shimano/SRAM freehub - 11-32T

The Descendant 6K DUB crankset delivers consistent performance every time out. Now featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 6000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included

The same bearings found in Trek and Gary Fisher full suspension bikes. - Refer to dimensions for best compatibility - A heavy contact seal provides the best defense against the elements - Refer to Service Manual for assembly instructions and service - The same bearings used in our bike assembly for proven quality - Wheel bearings are not an approved substitute for full suspension bearings

The ATAC XC 6 is made for XC mountain bike riders and gravel cyclists. It features a chromed, hollow steel axle for lightness and durability, and a composite body and tension adjustment to adjust the feel of the pedal. The exclusive ATAC system (TIME patent) offers very easy engagement, while its open design automatically clears debris each time you step in. The ATAC XC 6 is also suitable for cyclocross, trail riding, and bike touring. - Includes ATAC cleats - Steel bearings - Release angle: 10° with ATAC Easy cleats, 13 or 17° with ATAC cleats - Adjustable tension with 3 different spring positions - Weight: 290g

- Size: 16 x 1.75 – 2.125 - ISO Width: 47mm – 57mm - ISO Diameter: 305 / 16" - Shaft Type: Smooth - Flat Protection: Thorn Resistant - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 76g (1.25-1.5), 88g (1.5-1.75)

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Labeled Size: 24 x 1 - ISO Diameter: 540 / Wheelchair - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta Short 32-40mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 83g

- Low Lead Valve - ISO Diameter: 540 / wheelchair - ISO Width (mm): 35mm - Labeled Size: 24 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 124g

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

- Size: 650B x 35 – 43 - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 83g

- Size: 650c x 18 – 23 - ISO Diameter: 571 / 650c - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 89-92g

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 128g (32mm), 129g (48 & 60mm)

Bred from the racetrack, the newly formulated Performance Resin Pads are our highest performing pads to date. - New Performance Resin Compound - Fits all TRP 2-Piston Calipers - Increased Heat Stability - Shorter Bed-In Process - Provides a lighter lever feel - Increases power transfer with a snappy initial bite - Sold Per Wheel

20mm thick dual concave platform with polished and chamfered sides to clear mud Offered in standard and large sizes for optimal shoe-pedal interface 4 bearings and 2 DU bushings per pair with full length axles for strength and durability Customizable pin layout Ten 4mm traction pins per side, additional color pin kits available Size: 9/16" Dimensions: 110mm x 100mm (Standard); 115mm x 120mm (Large) Weight: 488g. Color: black

T3 Nylon Pedals are made from a strong and lightweight thermoplastic Nylon and have 40 3mm pins to keep your foot in place on the 110X100mm platform when you stomp a landing or plough through a rock garden.

The SwissStop Disc RS brake pad set offers a highly balanced combination of brake performance, durability and incredibly low noise in all conditions. - Delivers a smooth feel in the brake lever with predictable and progressive brake power - Provides extremely quiet operation in all environments - Features an organic compound that offers smooth modulation and is rotor-friendly - At 1.6mm thick the steel backplate saves weight over standard designs, yet provides the preferred thermal characteristics, strength and stability of steel - Compatible with SRAM Code R (2018+), RSC (2018+), Guide RE; Avid Code (2011-2014), Code R - Pad Shape Number: 36 - Designed for ebike: Yes - Backing Plate Material: Steel - Compound: Organic

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. Classic collection celebrates cycling with the most recognized colors. - Super Sticky PU (top layer): Superior hand feel with long lasting performance. Extremely tacky advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. Embossed with the sacred geometric Supacaz pattern that maximizes grip and tackiness. - Kush Foam (middle layer): Exclusive compound that maximizes the Kush feel from the thinnest amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Tackiest/best hand feel - Long-lasting PU tape - Laser-etched aluminum bar plugs - High-end rubberized finishing tape - Material: PU - Length: 2160mm - Width: 30mm - Thickness: 3mm

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. Galaxy series adds just enough color to mix or match with any bike. - Super Sticky PU (top layer): Superior supple hand feel with long-lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maxamizes grip. - Tackiest/Best Hand Feel - Long-lasting PU tape - TruNeon: Super Bright, Exclusive Colors 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. StarFade will transform any bike into a head-turner with a blast of color and flashy graphics. - Super Sticky PU (top layer): Superior supple hand feel with long lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Tackiest/best hand feel - Long-lasting PU tape 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. The TruNeon collection delivers the brightest and most vibrant colors to ever touch bar tape. - Super Sticky PU (top layer): Superior supple hand feel with long-lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock-absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Tackiest/best hand feel - Long-lasting PU tape - TruNeon: Super bright, exclusive colors 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes