Cane Creek HELM MKII AIR 29 SUSPENSION FORK - 29", 160MM TRAVEL, 15 X 110MM BOOST, 44MM OFFSET, SUNBURST LIMITED EDITION

HAND-BUILT IN WESTERN NORTH CAROLINA

The Helm MKII is our first major update of the Helm fork lineup and improves on its predecessor in nearly every way. Hand-built in Western North Carolina and rigorously tested and developed in the Appalachian Mountains.

Featuring an updated damper design with new compression and mid valve circuits, a new SKF oil seal head, and Motorex 2.5 weight damper oil. All of these elements work to reduce friction and increase sensitivity.

Specifications
Weight
2080 grams [Air]
2340 grams [Coil]

Damping
High Speed Compression, Low Speed Compression, Low Speed Rebound

Adjustments
High speed compression (10 positions)
Low speed compression (10 positions)
Low speed rebound (10 positions)
Indexed Volume Adjustment system [Air]
Spring Preload Adjustment [Coil]

Travel
Pre-Set from Factory at 160mm | Optimized for 130-160mm of travel. Travel is internally adjustable with 10mm Increments (160mm down to 130mm).
No additional parts required.

Spring
Double-Air system with tunable High volume positive and negative air springs [Air]
55 lb Coil Spring installed from factory 35-45-55-65 lbs springs available [Coil]

Stanchion Diameter
35mm

Min. Brake Rotor Size
180mm. *If you are using a Hope Tech brake on a Helm fork, you will need to use a 200mm rotor with appropriate adapter.

Spacing / Offset
"D-Loc" 15mm Bolt-on thru axle 15mm x 110 BOOST spacing / 44mm offset

Max Tire Size
64mm wide by 749mm tall (29) / 75mm wide by 739mm tall (27.5+)